Konica Minolta SONIMAGE HS2 - Page 64

64
1.6 System Conguration and Part Name
SD memory card
Recommended SD memory cards used in this system are listed below. To purchase the SD memory card, contact
your service representative.
SDHC memory card Class10 PFS0032U series (from TOSHIBA)
PFS0032U-1DCK (32 GB), PFS016U-1DCK (16 GB), PFS008U-1DCK (8 GB)
SDHC memory card Class10 specs SD-WA series (from Panasonic)
SDHC memory card Class4 specs SD-LB series (from Panasonic)
(Example)
• Speed: Operable with Classes 4 and 10.
• SD Speed Class is the speed standard regarding continuous writing. Check it on the label side of your card.
z
To remove an SD memory card
1 Touch the icon in the status indicator area.
• A safe removal menu pops up for display.
2. Choose the icon for removing the SD memory card you wish to remove.
• It will be removed safely.
HINT
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
• The same applies to the removal of other external devices: touch the icon and operate the system following the infor-
mation displayed on the screen.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••