Sequencer mode
108
SEQ Page Select
You can use the following ways to select the pages in
Sequencer mode.
1. Press the SEQ button, and then press the MENU button
to access “Page Select.”
“Page Select” shows an abbreviated name for each page.
The page shown in grey is the page selected just prior to
pressing the PAGE button.
2. Select the desired page in the display.
Other ways to select pages
• Hold down the PAGE button and press one of the
numeric keys, 0–9, to specify a page number and to access
the corresponding page.
For example, if you want to access the P3: Track Param
page, hold down the PAGE button and press numeric
key 3.
• Pressing the EXIT button will take you to the P0–1: Play/
REC page. If a page other than the Program T01–08 page
is selected, pressing the EXIT button will take you to the
Program T01–08 page.
Page Main content
PLAY
P0: Play/REC
Song selection, playback, and recording.
(see p.109)
Program selection for each track. (see
p.111)
Pan and volume settings etc. for each
track. (see p.113)
Simple arpeggiator editing. (see p.114)
Tone Adjust editing. (see p.115)
Recording method selection. (see p.116)
Track playback loop settings. (see p.119)
EDIT
P1: Controllers SW1, 2, and knob settings. (see p.122)
P2: EQ EQ settings for each track. (see p.141)
P3: Track Param
Various parameter settings for each track
(MIDI channel, OSC selection, Pitch
setting, etc.) (see p.125)
P4: Zone/Delay
Key split and layer settings.
(Key zone and velocity zone) (see p.129)
Time delay from note‐on to beginning of
sound. (see p.131)
P5: MIDI Filter
MIDI transmit/receive filter settings. (see
p.133)
P6: Track Edit
Step recording.
Piano roll edit.
Event recording.
Copy, delete, and other track editing. (see
p.137)
ARP & DRUM TRACK
P7: Arpeggiator/
Drum Track
Arpeggiator settings. (see p.143)
Drum track settings. (see p.146)
EFFECT
P8: Routing/IFX
Oscillator output bus and master effect
send level settings. (see p.148)
Insert effect routing, selection, and
settings. (ssee p.148)
P9: MFX/TFX/
LFO
Master effect routing, selection, and
settings. (see p.152)
Total effect selection and settings. (see
p.152)
Common FX LFO settings (see p.154)
PATTERN & CUE
P10: Pattern/
RPPR
Pattern recording and editing. (see p.155
RPPR settings. (see p.158)
Converting a pattern to a drum track
pattern. (see p.188)
P11: Cue List
Cue list settings.
Consecutive playback of multiple songs.
Converting to a song. (see p.160)
To Next Page
Loading...
