Korg Krome - 191: LCR BPM Long Dly (L;C;RBPM Long Delay); 192: St. BPM Long Dly (Stereo BPM Long Delay)

336
191: LCR BPM Long Dly (L/C/R
BPM Long Delay)
The L/C/R delay enables you to match the delay time with
the song tempo.
a: Time Over?
You can set the delay time up to 10,920msec. If the delay
time exceeds this limit, the error message “OVER!” appears
in the display. Set the delay time parameters so that this
message will not appear. Time Over? is only a display
parameter.
192: St. BPM Long Dly (Stereo
BPM Long Delay)
The stereo delay enables you to match the delay time with
the song tempo.
a: Time Over? L, R
You can set the delay time up to 5,460msec. If the delay time
exceeds this limit, the error message “OVER!” appears in the
display. Set the delay time parameters so that this message
will not appear. Time Over? is only a display parameter.
a
BPM
MIDI,
40.00...
300.00
MIDI syncs to the system tempo;
40–300 sets the tempo manually
for this individual effect p.285
Time Over? ---, OVER!
Displays an error message when
the delay time exceeds the
upper limit p.336
b
L Delay Base
Note
...
Selects the type of notes to
specify the delay time for TapL
p.285
Times x1...x32
Sets the number of notes to
specify the delay time for TapL
p.285
Level 0...50 Sets the output level of TapL
c
C Delay Base
Note
...
elects the type of notes to
specify the delay time for TapC
p.285
Times x1...x32
Sets the number of notes to
specify the delay time for TapC
p.285
Level 0...50 Sets the output level of TapC
d
R Delay Base
Note
...
Selects the type of notes to
specify the delay time for TapR
p.285
Times x1...x32
Sets the number of notes to
specify the delay time for TapR
p.285
Level 0...50 Sets the output level of TapR
e
Feedback
(C Delay)
–100...+100
Sets the feedback amount of
TapC
Src Off...Tempo
Selects the modulation source
for the TapC feedback
Amt –100...+100
Sets the modulation amount of
the TapC feedback
f
High Damp
[%]
0...100
Sets the damping amount in the
high range p.289
Low Damp
[%]
0...100
Sets the damping amount in the
low range p.289
g
Input Level
D-mod [%]
–100...+100
Sets the modulation amount of
the input level p.284
Src Off...Tempo
Selects the modulation source
for the input level p.284
h Spread 0...50
Sets the width of the stereo
image of the effect sound
p.289
i
Wet/Dry
Dry, 1 : 99...
99 : 1, Wet
Sets the balance between the
effect and the dry input
Src Off...Tempo
Selects a modulation source for
Wet/Dry
Amt –100...+100
Sets the modulation amount for
We
t
/Dry
C Delay
R Delay
Left
Right
Feedback
Spread
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Input Level D-mod
High Damp
Low Damp
L Delay
Input Level D-mod
+
Level
Level
Level
Tempo
BPM
BPM
Base Note x Times
Base Note x Times
Base Note x Times
a
BPM
MIDI,
40.00...
300.00
MIDI syncs to the system tempo;
40–300 sets the tempo manually
for this individual effect p.285
Time Over? L ---, OVER!
Display the error message if the
left channel delay time exceeds
the upper limit p.336
R ---, OVER!
Display the error message if the
right channel delay time exceeds
the upper limit p.336
b
L Delay Base
Note
...
Selects the type of notes to
specify the left channel delay
time p.285
Times x1...x32
Sets the number of notes to
specify the left channel delay
time p.285
Adjust [%] –2.50...+2.50
Fine-adjust the left channel delay
time
c
R Delay Base
Note
...
Selects the type of notes to
specify the right channel delay
time p.285
Times x1...x32
Sets the number of notes to
specify the right channel delay
time p.285
Adjust [%] –2.50...+2.50
Fine-adjust the right channel
delay time
d
L Feedback –100...+100
Sets the feedback amount for
the left channel
Src Off...Tempo
Selects the modulation source of
feedback amount
L Amt –100...+100
Sets the modulation amount of
the left channel feedback
e
R Feedback –100...+100
Sets the feedback amount for
the right channel
R Amt –100...+100
Sets the modulation amount of
the right channel feedback
f
High Damp
[%]
0...100
Sets the damping amount in the
high range p.289
g
Low Damp
[%]
0...100
Sets the damping amount in the
low range p.289
h
Input Level
D-mod [%]
–100...+100
Sets the modulation amount of
the input level p.284
Src Off...Tempo
Selects the modulation source
for the input level p.284
i
Wet/Dry
Dry, 1 : 99...
99 : 1, Wet
Sets the balance between the
effect and the dry input
Src Off...Tempo
Selects a modulation source for
Wet/Dry
Amt –100...+100
Sets the modulation amount for
Wet/Dry
Left
Right
Feedback
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High Damp Low Damp
High Damp
Low Damp
Tempo
BPM
BPM
Base Note x Times
Adjust [%]
Base Note x Times
Adjust [%]
Delay
Delay