Korg Krome - Program Mode; PROG Page Select; 6-9: Common Keytrk

1
Program mode
PROG Page Select
You can select Program mode pages in several ways.
1. Press the PAGE button.
Alternatively, press the mode button on the upper left side
of the display, and then press the right side of the menu.
“Page Select” shows an abbreviated name for each page.
The page prior to pressing the PAGE button is shown in
light blue.
2. Select the desired page in the display.
Other ways to select pages
• Hold down the PAGE button and press numeric keys 0–9
to jump to the corresponding page.
For example, hold down the PAGE button and press
numeric key 4 to jump to the P4: Amp/EQ page.
• Press the EXIT button to return to the Play page. If
something other than the main page is selected, press the
EXIT button to access the main page.
Page Main content
PLAY
P0: Play
Select and play programs. (see p.2)
Oscillator and Drum track level settings.
(see p.5)
Simple drum track editing. (see p.6)
Simple arpeggiator editing. (see p.6)
Tone Adjust settings. (see p.8)
EDIT
P1: Basic/
Controllers
Basic program settings, such as voice
assign mode. (see p.12)
SW1, 2, and knob settings. (see p.16)
P2: OSC/Pitch
Oscillator selection and pitch settings. (see
p.17)
P3: Filter Filter 1, 2(tone) settings. (see p.26)
P4: Amp/EQ
Amp 1, 2 (volume) settings. (see p.35)
Amp 1, 2 driver and pan settings. (see p.40)
3‐band parametric EQ settings. (see p.41)
P5: LFO LFO settings. (see p.42)
P6: AMS/
Common
KeyTrack
AMS Mixer settings. (see p.46)
Common keyboard tracking settings. (see
p.52)
ARP & DRUM TRACK
P7: Arpeggiator/
Drum Track
Arpeggiator settings. (see p.53)
Drum track settings. (see p.55)
EFFECT
P8: Routing/IFX
Oscillator output bus and master effect
send level settings. (see p.58)
Insert effect routing, selection, and
settings. (see p.59)
P9: MFX/TFX/
LFO
Master effect routing, selection, and
settings. (see p.62)
Total effect selection and settings. (see
p.62)
Common FX LFO settings (see p.63)