Korg Krome - 2-3: Eq T01-08, 2-4: Eq T09-16

Sequencer mode
124
2–3: EQ T01–08,
2–4: EQ T09–16
Here, you can adjust the settings for the mid‐sweepable
three‐band EQ for each MIDI track.
2–3(4)a: Track Select, Tempo, RPPR
2–3(4)b: Track Info
For more information, please see “2–1: Trim T01–08, 2–2:
Trim T09–16” on page 123.
2–3(4)c: 3 Band Parametric EQ
Track 01 (Track Number):
High Gain [dB] [–18.0…+00.0…+18.0]
This controls the gain of the 10 kHz High Shelf EQ, in
increments of 0.5 dB.
Mid Freq [Hz] (Mid Frequency) [100…10k]
This sets the center frequency for the Mid sweep EQ.
Mid Gain [dB] [–18.0…+00.0…+18.0]
This controls the gain of the Mid Sweep EQ, in increments of
0.5 dB.
Low Gain [dB] [–18.0…+00.0…+18.0]
This controls the gain of the 80 Hz Low Shelf EQ, in
increments of 0.5 dB.
Track 02...08, 09...16 (Track Number):
These parameters adjust the three‐band EQ (with sweepable
mid range) for MIDI tracks 2–8 and 9–16. They are the same
as for track 1. For more information, please see “Track 01
(Track Number):” above.
V 2–3(4): Menu Command
•0: Memory Status see p. 163
•1: Exclusive Solo see p. 64
•2: Rename Song see p. 163
•3: Delete Song see p. 163
•4: Copy From Song see p. 163
•5: Load Template Song see p. 163
•6: Save Template Song (Save as User Template Song)
see p. 164
•7: FF/REW Speed see p. 164
•8: Set Location (Set Location for Locate Key) see p. 164
•9: GM Initialize see p. 165
•10:
Copy from Combination see p. 166
• 11: Copy from Program see p. 167
For more information, please see “Sequencer: Menu
Command” on page 163.
2–3c
2–3a
2–3b
2–3
Menu