Korg Krome - KROME and MIDI Ccs; Responses to Standard MIDI Controllers

Appendices
356
KROME and MIDI CCs
Responses to standard MIDI
controllers
The following table shows how the KROME responds to
MIDI control change messages, and the relation between
settings and controller movements on the KROME.
CC# Control Value Function
0 Bank select (MSB) 0…127 bank select message MSB *1
1 Modulation 1 0…127 corresponds to joystick movement in the +Y direction (Vertical upward)
2 Modulation 2 0…127 corresponds to joystick movement in the –Y direction (Vertical downward)
3– – –
4 Foot controller 0…127
corresponds to when the assignable pedal function is set to Foot
Pedal
5 Portamento time 0…127 portamento time
6 Data entry (MSB) 0…127 MSB of RPN and NRPN data *2
7Volume 0…127 volume *3
8 Post Insert Effect panpot 0…127 pan after the Insert Effect
9– – –
10 Panpot 0…127 pan
11 Expression 0…127 volume *3
12 Effect control 1 0…127 corresponds to effect dynamic control source FX Control1 (p.363)
13 Effect control 2 0…127 corresponds to effect dynamic control source FX Control2 (p.363)
14 ARP ON/OFF control
0…63(Off),
64…127(On)
equivalent to on/off when CC#14 is assigned to the
ARP buttons *7
15 – – –
16 Controller (CC#16) 0…127 for controlling AMS or Dmod
17 Knob modulation 1 0…127
corresponds to when the Realtime Controls knob function is set to Knob
Mod.1
18 Controller (CC#18) 0…127 for controlling AMS or Dmod *8
19 Knob modulation 2 0…127
corresponds to when the Realtime Controls knob function is set to Knob
Mod.2
20 Knob modulation 3 0…127
corresponds to when the Realtime Controls knob function is set to Knob
Mod.3
21 Knob modulation 4 0…127
corresponds to when the Realtime Controls knob function is set to Knob
Mod.4
22 ARP–GATE control 0…127
equivalent to when CC#22 is assigned to arpeggio control knob 1
(GATE)
*7
23 ARP–VELOCITY control 0…127
equivalent to when CC#23 is assigned to arpeggio control knob 2
(VELOCITY)
*7
24 ARP–SWING control 0…127
equivalent to when CC#24 is assigned to arpeggio control knob 3
(SWING)
*7
25 ARP–STEP control 0…127
equivalent to when CC#25 is assigned to arpeggio control knob 4
(STEP)
*7
26…31 – – –
32 Bank select (LSB) 0…127 LSB of bank select message *1
33…37 – – –
38 Data entry (LSB) 0…127 LSB of RPN or NRPN data *2
39…63 – – –
64 Damper 0…127 damper effect
65 Portamento On/Off
0…63(Off),
64…127(On)
turn the portamento effect on/off
66 Sostenuto On/Off
0…63(Off),
64…127(On)
turn the sostenuto effect on/off
67 Soft 0…127 soft pedal effect
68…69 – – –
70 Sustain level 0…127 sustain levels of the filter EG and amp EG *4
71 Filter resonance level 0…127 resonance level of the filter *4
72 Release time 0…127 cutoff frequency of the high pass filter *4
73 Attack time 0…127 release times of the filter EG and amp EG *4
74 Filter cutoff frequency 0…127 cutoff frequency of the low pass filter *4
75 Decay time 0…127 decay times/slope times of the filter EG and amp EG *4
76 LFO1 speed 0…127 LFO1 speed *4