Combination mode
90
5–11: <6> T01–08,
5–12: <6> T09–16
5–11(12)a: Combination Name, Tempo
5–11(12)b: Timbre Info
For more information, please see “2–1: EQ Trim T01–08, 2–2:
EQ Trim T09–16” on page 79.
5–11(12)c: MIDI Filter6
Timbre 01 (Timbre Number):
Enable Other Control Change Messages [Off, On]
Specifies whether or not MIDI control messages not covered
in the preceding items MIDI Filter will be transmitted and
received.
Enable Waveform SysEx [Off, On]
This enables or disables reception of MIDI system exclusive
messages that freely switch the multisample used by an
oscillator while the program is sounding.
Timbre 02...08, 09...16 (Timbre Number):
These are the MIDI Filter6 settings for timbres 2–8 and 9–16.
They are the same as for timbre 1. For more information,
please see “Timbre 01 (Timbre Number):” above.
V
5–11(12): Menu Command
•0: Write Combination see p. 101
•1: Exclusive Solo see p. 101
•2: Auto Song Setup see p. 65
•3: Copy from Program see p. 101
For more information, please see “Combination: Menu
Command” on page 101.
5–11a
5–11
Menu
5–11b
5–11a
To Next Page
Loading...
