Program mode
2
PROG P0: Play
This is the main Program mode page. Here, you can:
• Select a program to play.
• Select patterns and programs for the Drum Track.
• Adjust the oscillator and drum track levels.
• Make simple edits for the Arpeggiator.
• Adjust the Realtime Contorols.
• Use the Tone Adjust function to make simple edits for
program parameters
All MIDI data in Prog P0: Play is transmitted and
received on the global MIDI channel MIDI Channel
(Global 1–1a).
Tip: Auto Song Setup
The Auto Song Setup feature copies the current Program or
Combination into a Song, and then puts the KROME in
record‐ready mode.
If inspiration for a phrase or song strikes you while you’re
playing, you can use Auto Song Setup to start recording
immediately. For more information, please see “Auto Song
Setup” on page 106.
0–1: Main
0–1a: Program Select
Bank (Bank Select) [A...F, GM, g(1)...g(9), g(d)]
This is the Bank containing the current Program.
Press the BANK A–F button to select a bank.
• To select the GM bank, use the numeric keys.
GM: While holding down [0], press [‐].
g(1)–g(9): While holding down [0], press a variation
number [1]–[9]. If the bank contains no variation
programs, the basic GM sound set will be selected. (An
“*” symbol is shown at the beginning of the program
name.)
g(d): While holding down [0], press [.].
Program Select
[A…F: 0...127, GM, g(1)...g(9), g(d): 1...128]
Here you can select a program.
To switch programs
•Choose Program Select, use the numeric keys 0–9 to enter
a program number, and press the ENTER button.
•Choose Program Select, and turn the VALUE dial or use
the INC/DEC buttons.
• Press the Program Select Popup to view and select from
the Bank/Program Select menu organized by bank.
• Press the Category Popup to view and select from the
Category/Program Select menu organized by category.
• You can use a foot switch to select programs. (see “Foot
Switch Assign” on page 202 and “List of Foot Switch
assignments” on page 349)
• You can select programs by transmitting a MIDI Program
Change from a connected external MIDI device.
Bank/Program Select menu:
1. Press the popup button at the left of Program Select to
open the Bank/Program Select menu.
2. Press one of the tabs on the left to select a specific bank.
The Variation button is active if Bank GM is selected;
pressing it will switch the banks in the following order:
GM→g(1)→g(2)→... →g(8)→g(9)→GM.
3. From the list, You can touch a Program’s name directly,
or use the INC and DEC buttons.
Use the scroll bar to view information not currently shown.
Note: If you want to find a sound by its program name, use
the Find function (see p.2).
4. Press the OK button to confirm your choice, or press
the Cancel button to exit without switching Programs.
Bank/Program Select menu
Find (search function)
Here's how to search for a program by part of its name.
1. In the Bank/Program Select menu or the Category/Pro-
gram Select menu, select the tab that you want to
search.
Note: The programs in the selected tab will be the target for
searching.
2. Press the Find button on the lower left side to open the
dialog box.
0–1a
0–1b
0–1e
0–1c
0–1d
0–1
Menu
Mode Stop WatchPage Menu
Bank
Program Select Popup Program Select
Category Popup
Tempo
Tab
Scroll bar
To Next Page
Loading...
