Program mode
16
1–3: Controllers Setup
Here you can specify the SW1 and SW2 switch and front
panel 1–4 knobs of the program when Realtime Controls
USER is selected.
1–3a: Panel Switch 1/2 Assign
SW1 (SW1 Assign) [Off, ..., JS-Y Lock]
This assigns the function of SW1. For more information,
please see “List of SW 1/2 assignments” on page 348.
Note: If you change the function setting, the status is reset to
off.
Note: The on/off status of the SW1, SW2 switches is
memorized when you save the program.
Mode (SW1 Mode) [Toggle, Momentary]
This specifies the on/off operation when you press the SW1
switch.
Toggle: The state will alternate between On and Off each
time you press the SW1 switch.
Momentary: The state will remain On only while you
continue holding down the SW1 switch.
SW2 (SW2 Assign) [Off, ..., JS-Y Lock]
Mode (SW2 Mode) [Toggle, Momentary]
This assigns the function of SW2. The functions that can be
assigned to SW2 are the same as for SW1, with the substitution
of SW2 Mod. (CC#81) instead of the SW1’s SW1 Mod. (CC#80).
1–3b: Realtime Controls Knob Assign
Here you can select the functions (mainly types of control
change) that are assigned to knobs 1–4 when Control
Assign (0–8b) Realtime Controls USER is selected. (See
“Realtime Controls Knobs 1–4 Assignments” on page 348)
The functions you assign here are active when you use the
SELECT button to select USER, and operate knobs 1–4.
USER [1] [Off, ..., MIDI CC#95, CC#102…119]
USER [2] [Off, ..., MIDI CC#95, CC#102…119]
USER [3] [Off, ..., MIDI CC#95, CC#102…119]
USER [4] [Off, ..., MIDI CC#95, CC#102…119]
V
1–3: Menu Command
•0: Write Program see p. 64
•1: Exclusive Solo see p. 64
•2: Auto Song Setup see p. 65
For more information, please see “Program: Menu
Command” on page 64.
To Next Page
Loading...
