Korg Krome - SEQ P6: Track Edit; 6-1: Track Edit

SEQ P6: Track Edit 6–1: Track Edit
137
SEQ P6: Track Edit
6–1: Track Edit
Here, you can edit MIDI tracks 1–16, and the master track.
When editing a MIDI track, you can move, insert, and delete
individual note events or control change data, or copy,
move, insert, and delete measures or tracks. You can also
perform Step Recording in this page.
When editing the master track, you can edit the tempo and
the time signature.
Note: To perform track editing (or step editing), use Track
Select to select the track you want to edit, and use From
Measure and To End of Measure parameters to specify the
region that you want to edit. Then choose a command from
the menu, and execute the edit. For details on the specific
commands, please see “Sequencer: Menu Command” on
page 163.
6–1a: Location, Meter, Tempo, Tempo
Mode, Song Select, Track Select,
Reso, RPPR
6–1b: Track Info
(“0–1(2)a: Location, Meter, Tempo, Tempo Mode, Song
Select, Track Select, Reso, RPPR” on page 109)
(“2–3: EQ T01–08, 2–4: EQ T09–16” on page 124)
6–1c: Track data Map, From Measure, To
End of Measure
Track data Map
This area shows the presence or absence of performance
data, and indicates the edit range, etc. The currently selected
Track will be highlighted.
From Measure [001…999]
To End of Measure [001…999]
Specifies the range of measures that you wish to edit (or
copy from) or step‐record.
Use From Measure to specify the starting measure, and To
End of Measure to specify the ending measure.
Link From Measure current location [Off, On]
If this check box is selected, the From Measure setting will
be linked to the current location, and the location of the
displayed track will also change. The location will change to
follow this even during playback or recording.
V 6–1: Menu Command
•0: Memory Status see p. 163
•1: Exclusive Solo see p. 64
•2: Step Recording see p. 168
•3: Event Edit see p. 169
•4: Piano Roll see p. 171
•5: Set Song Length see p. 176
•6: Erase Track see p. 176
•7: Copy Track see p. 176
•8: Bounce Track see p. 177
•9: Erase Measure see p. 177
•10: Delete Measure see p. 177
•11: Insert Measure see p. 178
•12: Repeat Measure see p. 178
•13: Copy Measure see p. 179
•14: Move Measure see p. 179
•15: Create Control Data see p. 180
•16: Erase Control Data see p. 181
•17: Quantize see p. 181
•18: Shift/Erase Note see p. 182
•19: Modify Velocity see p. 183
•20: FF/REW Speed see p. 164
•21: Set Location (Set Location for Locate Key) see p.
164
•22: Create Exclusive Data see p. 183
•23: Erase Exclusive Data see p. 184
For more information, please see “Sequencer: Menu
Command” on page 163.
6–1c
6–1b
6–1a
6–1
Menu
MIDI Track
Master Track
From Measure
Master track data
Locations move in synchronization
MIDI data
Measure no.
Patterns used
To End of Measure