Sequencer mode
128
3–7: Scale T01–08,
3–8: Scale T09–16
Here, you can adjust the settings for the scale for each MIDI
track.
3–7(8)a: Location, Meter, Tempo, Tempo
Mode, Song Select, Track Select, Reso,
RPPR
3–7(8)b: Track Info
For more information, please see “0–1(2)a: Location, Meter,
Tempo, Tempo Mode, Song Select, Track Select, Reso, RPPR”
on page 109.
For more information, please see “2–1: Trim T01–08, 2–2:
Trim T09–16” on page 123.
3–7(8)c: Scale
Track 01 (Track Number):
Use Program’s Scale [Off, On]
MIDI track can use the scale that is specified by Scale (Prog
1–2b).
On (checked): The scale specified by the program will be
used.
Off (unchecked): The scale specified by Scale will be used.
Track 02...08, 09...16 (Track Number):
Here, you can set the parameters for the scale of each track
2–8 and 9–16. The settings are the same as for track 1. For
more information, please see “Track 01 (Track Number):”
above.
Scale:
This specifies the scale that the song will use. For more
information, please see “1–2d: Scale” on page 15.
Type (Song’s Scale)
[Equal Temperament...User Octave Scale15]
Selects the scale.
Key [C…B]
Random [0…7]
As this value is increased, an increasingly random deviation
will be added to the pitch at each note‐on.
If Status (Seq 3–1(2)c) is INT, this setting will affect the
pitch produced by the KROME. If Status is EXT, this
setting will affect the note number of the note messages
transmitted via MIDI.
V
3–7(8): Menu Command
•0: Memory Status see p. 163
•1: Exclusive Solo see p. 64
•2: Rename Song see p. 163
•3: Delete Song see p. 163
•4: Copy From Song see p. 163
•5: Load Template Song see p. 163
•6: Save Template Song (Save as User Template Song)
see p. 164
•7: FF/REW Speed see p. 164
•8: Set Location (Set Location for Locate Key) see p. 164
•9: GM Initialize see p. 165
•10:
Copy from Combination
see p. 166
• 11: Copy from Program see p. 167
For more information, please see “Sequencer: Menu
Command” on page 163.
3–7c
3–7a
3–7b
3–7
Menu
To Next Page
Loading...
