274
positive value for both Resonance and Wet/Dry, and if you
set a negative value for both Resonance and Wet/Dry.
h: High Damp [%]
This parameter sets the amount of damping of the resonance
in the high range. Increasing the value will cut high‐range
harmonics.
043: Small Phaser
This models a classic phaser that was born in New York
during the 1970s. With a warm, rich tone, it is also loved by
many electric piano players.
b: Color
This lets you choose between two types of phaser sound.
Turning this On produces a deeper phase shift effect with a
distinctive modulation.
044: Orange Phaser
This models a standard model of analog phaser that
achieved great popularity. It gives a sense of movement to
electric piano sounds, adding a rich‐sounding phase shift
effect.
045: Black Phaser
This models a Danish‐made four‐stage phaser that featured
a wide range.
046: U-VIBE
This models a famous chorus/vibrato pedal effect.
Simulating a rotary speaker, this effect produced a
fascinatingly lush tone.
a
Speed [Hz] 0.10...10.0 Sets the speed of the LFO
Src Off...Tempo
Selects a modulation source for
Speed [Hz]
Amt –100...+100
Sets the modulation amount for
Speed [Hz]
b Color Off, On
Switches the tone of the phaser
sound p.274
c
Wet/Dry
–Wet...
–1 : 99, Dry,
1 : 99...Wet
Sets the balance between the
effect and the dry input
p.259, p.273
Src Off...Tempo
Selects a modulation source for
Wet/Dry
Amt –100...+100
Sets the modulation amount for
Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
+
Phaser
LFO
Color
a
Speed [Hz] 0.10...10.0 Sets the speed of the LFO
Src Off...Tempo
Selects a modulation source for
Speed [Hz]
Amt –100...+100
Sets the modulation amount for
Speed [Hz]
b
Depth 0...100
Sets the depth of LFO
modulation
Src Off...Tempo
Selects a modulation source for
Depth
Amt –100...+100
Sets the modulation amount for
Depth
c Resonance 0...100 Sets the resonance amount
d Manual 1...100
Sets the frequency where the
effect is applied
e
Wet/Dry
–Wet...
–1 : 99, Dry,
1 : 99...Wet
Sets the balance between the
effect and the dry input
Src Off...Tempo
Selects a modulation source for
Wet/Dry
Amt –100...+100
Sets the modulation amount for
Wet/Dry
a
Speed [Hz] 1.00...10.0 Sets the speed of the vibration
Src Off...Tempo
Selects a modulation source for
Speed [Hz]
Amt –100...+100
Sets the modulation amount for
Speed [Hz]
b
Depth 0...100 Sets the depth of vibration
Src Off...Tempo
Selects a modulation source for
Depth
Amt –100...+100
Sets the modulation amount for
Depth
c
Mix 0...100 Sets the effect mix level
Src Off...Tempo
Selects a modulation source for
Mix
Amt –100...+100
Sets the modulation amount for
Mix
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
+
Phaser
LFO
Resonance
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
+
U-VIBE
LFO
Mix
To Next Page
Loading...
