Combination mode
88
5–3: <2> T01–08,
5–4: <2> T09–16
5–3(4)a: Combination Name, Tempo
5–3(4)b: Timbre Info
For more information, please see “2–1: EQ Trim T01–08, 2–2:
EQ Trim T09–16” on page 79.
5–3(4)c: MIDI Filter2
Timbre 01 (Timbre Number):
Enable JS X as AMS [Off, On]
Specifies whether or not MIDI pitch bend messages (the X
axis of the joystick) will be received to control the AMS
effect assigned to JS X. (This is not a filter for MIDI pitch
bend message reception.) For more information, please see
“Alternate Modulation Sources (AMS)” on page 339.
Enable JS+Y [Off, On]
Specifies whether MIDI CC#1 (the +Y axis of the joystick, or
a Realtime Controls knob assign setting) will be transmitted
and received.
Enable JS–Y [Off, On]
Specifies whether MIDI CC#2 (the –Y axis of the joystick, or
a Realtime Controls knob assign setting) will be transmitted
and received.
Enable Ribbon CC#16 [Off, On]
Specifies whether or not MIDI CC#16 (specified as the
assignment of a Realtime Controls knob) will be transmitted
or received.
Timbre 02...08, 09...16 (Timbre Number):
These are the MIDI Filter2 settings for timbres 2–8 and 9–16.
They are the same as for timbre 1. For more information,
please see “Timbre 01 (Timbre Number):” above.
V
5–3(4): Menu Command
•0: Write Combination see p. 101
•1: Exclusive Solo see p. 64
•2: Auto Song Setup see p. 65
•3: Copy from Program see p. 101
For more information, please see “Combination: Menu
Command” on page 101.
5–5: <3> T01–08,
5–6: <3> T09–16
Here, you can specify whether the effect of knobs 1–4 (when
the SELECT button selection is Realtime Controls TONE)
will be transmitted and received. The MIDI control
messages assigned to knobs 1–4 when Realtime Controls
TONE is selected are fixed.
5–5(6)a: Combination Name, Tempo
5–5(6)b: Timbre Info
For more information, please see “2–1: EQ Trim T01–08, 2–2:
EQ Trim T09–16” on page 79.
5–5(6)c: MIDI Filter3
Timbre 01 (Timbre Number):
Enable Realtime Controls–CUTOFF [Off, On]
Enables or disables transmission and reception of MIDI
CC#74 (the KROME’s filter cutoff frequency). This is
assigned to knob 1 when Realtime Controls TONE is
selected.
Enable Realtime Controls–RESONANCE [Off, On]
Enables or disables transmission and reception of MIDI
CC#71 (the KROME’s filter resonance level). This is assigned
to knob 2 when Realtime Controls TONE is selected.
Enable Realtime Controls–EG INTENSITY [Off, On]
Enables or disables transmission and reception of MIDI
CC#79 (the KROME’s filter EG intensity). This is assigned to
knob 3 when Realtime Controls TONE is selected.
Enable Realtime Controls–RELEASE [Off, On]
Enables or disables transmission and reception of MIDI
CC#72 (the KROME’s filter/amp EG release time). This is
assigned to knob 4 when Realtime Controls TONE is
selected.
Timbre 02...08, 09...16 (Timbre Number):
These are the MIDI Filter3 settings for timbres 2–8 and 9–16.
They are the same as for timbre 1. For more information,
please see “Timbre 01 (Timbre Number):” above.
V
5–5(6): Menu Command
•0: Write Combination see p. 101
•1: Exclusive Solo see p. 64
•2: Auto Song Setup see p. 65
•3: Copy from Program see p. 101
For more information, please see “Combination: Menu
Command” on page 101.
To Next Page
Loading...
