Korg Krome - Global Mode; Global Page Select

193
Global mode
In Global mode, you can make settings that affect the entire
instrument, such as master tuning, MIDI, and memory
protect.
You can also edit user scales, drum kits, and user arpeggio
pattern setups.
If you want the settings you make in Global mode to be
backed up when the power is turned off, you must
write them into memory. From P5: Drum Kit, you’ll be
able to select the menu command Write Drum Kits.
From P6: Arpeggio Pattern, you’ll be able to select
Write Arpeggio Patterns. From the other pages of
Global mode, you’ll be able to select Write Global
Setting.
These commands can also be selected by pressing the
WRITE button.
Global Page Select
• Press the GLOBAL button to access Global mode.
You can use the following ways to select the pages in Global
mode.
1. Press the PAGE button to access “Page Select.”
The page accessed prior to pressing the PAGE button is
shown in grey.
2. Select the desired page in the display.
Other ways to select pages
• Hold down the PAGE button and press numeric keys 0–6
to specify a page number; you will access the
corresponding page.
For example, if you want to access the P3: Scales page,
hold down the PAGE button and press numeric key 3.
• Press the EXIT button to return to the P0: Basic Setup
page. If something other than the Basic page is selected,
press the [EXIT] button to access the Basic page.
Page Main content
GLOBAL PARAMETERS
P0: Basic Setup Basic overall settings. (see p.194)
P1: MIDI MIDI settings for KROME. (see p.198)
P2: Controllers
Controller settings such as the pedals
connected to the rear panel. (see p.202)
CC# assignments for Arpeggio
controllers. (see p.202)
P3: Scales
Scale settings created by the user. You can
specify 16 types of octave scale, and one
full‐range scale. (see p.203)
P4: Category
Edit category names for programs and
combinations. (see p.204)
DRUM KIT
P5: Drum Kit Edit drum kits. (see p.205)
ARP PATTERN
P6: Arpeggio
Pattern
Creating Arpeggio pattern. (see p.211)