Korg Krome - 064: Pitch Shift Mod. (Pitch Shift Modulation); 065: Organ Vib;Chorus (Organ Vibrato;Chorus)

286
064: Pitch Shift Mod. (Pitch
Shift Modulation)
This effect modulates the detuned pitch shift amount using
an LFO, adding a clear spread and width to the sound by
panning the effect sound and dry sound to the left and right.
This is especially effective when the effect sound and dry
sound output from stereo speakers are mixed.
a: Pitch Shift [cent]
f: Depth
These parameters set the amount of pitch shift and amount
of modulation by means of the LFO.
g: Pan
h: Wet/Dry
The Pan parameter pans the effect sound and dry sound to
the left and right. With L, the effect sound is panned left, and
the dry sound is panned right. With a Wet/Dry = Wet setting,
the effect and dry sound will be output in a proportion of
1:1.
065: Organ Vib/Chorus (Organ
Vibrato/Chorus)
This effect simulates the chorus and vibrato circuitry of a
vintage organ. The modulation speed and depth can be
customized.
b: Control Mode
c: Preset Type
d: Custom Mix
e: Custom Depth
f: Custom Speed [Hz]
If Control Mode=Preset, you can use c: Preset Type to select
the effect. In this case, the Custom Mix/Depth/Speed settings
are ignored. If Control Mode=Custom, the Custom Mix/
a
Pitch Shift
[cent]
–100...+100
Sets the pitch difference from
the input signal p.286
b
LFO
Waveform
Triangle,
Square
Selects the LFO Waveform
c
LFO
Frequency
[Hz]
0.02...20.00 Sets the speed of the LFO p.259
Src Off...Tempo
Selects a modulation source for
LFO speed
Amt
–20.00...
+20.00
Sets the modulation amount of
LFO speed
d
MIDI Sync Off, On
When this is on, the LFO speed is
set by BPM, Base Note, and
Times, instead of Frequency
p.257
BPM
MIDI,
40.00...
300.00
MIDI syncs to the system tempo;
40–300 sets the tempo manually
for this individual effect p.257
Base Note ...
Selects the type of notes that
specify the LFO speed p.257
Times x1...x32
Sets the number of notes that
specify the LFO speed p.257
e
LFO Type
Individual,
Common1,
Common2
Selects either (individual) LFO,
Common FX LFO1, or Common
LFO2 p.257
Common
LFO Offset
[deg]
–180...+180
Sets the phase offset when Type
= Common 1 or Common 2
p.257
f
Depth –100...+100
Sets the LFO modulation depth
for pitch shift amount p.286
Src Off...Tempo
Selects the modulation source of
the depth of modulation
Amt –100...+100
Sets the modulation amount of
the depth of modulation
g Pan
L, 1 : 99...99 :
1, R
Sets the panning effect sound
and dry sound separately
p.286
h
Wet/Dry
Dry, 1 : 99...
99 : 1, Wet
Sets the balance between the
effect and the dry input p.286
Src Off...Tempo
Selects a modulation source for
Wet/Dry
Amt –100...+100
Sets the modulation amount for
Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
LFO: Tri / Sqr
Pan
+
Pitch Shifter
Pitch
Higher
Pitch Shift Mod - Pitch Shift / Depth
Lower
Original Pitch
Pitch Shift (+ value)
LFO Waveform=Triangle
Depth (+value)
LFO Waveform=Square
Depth (–value)
a Input Trim 0...100 Sets the input level
b
Control
Mode
Preset,
Custom
Selects either preset or custom
settings p.286
c
Preset Type
V1, C1, V2, C2,
V3, C3
Selects the effect type when
Mode=Preset
V1/V2/V3 are variations of
vibrato, and C1/C2/C3 are varia-
tions of chorus p.286
Src Off...Tempo
Selects the modulation source
that will change the effect type
Amt –5...+5
Sets the modulation amount for
changing the effect type
p.287
d
Custom Mix
Vibrato,
1:99...99:1,
Chorus
Sets the mix level of the direct
sound when Mode=Preset
p.286
Src Off...Tempo
Selects the modulation source
that will control the mix level of
the direct sound
Amt –100...+100
Sets the modulation amount for
controlling the mix level of the
direct sound
e
Custom
Depth
0...100 Sets the vibrato depth p.286
Src Off...Tempo
Selects the modulation source
that will control vibrato depth
Amt –100...+100
Sets the modulation amount for
controlling the vibrato depth
f
Custom
Speed [Hz]
0.02...20.00 Sets the vibrato speed p.286
Src Off...Tempo
Selects the modulation source
for controlling the vibrato speed
Amt
–20.00...
+20.00
Sets the modulation amount for
controlling the vibrato speed
g
Wet/Dry
Dry, 1 : 99...
99 : 1, Wet
Sets the balance between the
effect and the dry input
Src Off...Tempo
Selects a modulation source for
Wet/Dry
Amt –100...+100
Sets the modulation amount for
Wet/Dry
+
Vibrato/Chorus
Mode
Preset Setting
Custom Parameters
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out