EasyManua.ls Logo

Korg Krome - 059: St. Phaser + Trml (Stereo Phaser + Tremolo); 060: St. Ring Modulator (Stereo Ring Modulator)

Korg Krome
380 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Modulation and Pitch Shift (Mod./P.Shift) 059: St. Phaser + Trml (Stereo Phaser + Tremolo)
283
059: St. Phaser + Trml (Stereo
Phaser + Tremolo)
This effect combines a stereo phaser and tremolo, with
linked LFOs. Swelling phaser modulation and tremolo
effects synchronize with each other, creating a soothing
modulation effect particularly suitable for electric piano.
a: Type
a: LFO Phase [degree]
Select the type of phaser LFO and tremolo LFO for the Type
parameter. How the effect sound moves or rotates depends
on the type of LFO. Selecting LFO Phase enables you to
offset the timing of the phaser peak and control a subtle
movement and rotation of the sound.
g: Phaser Wet/Dry
j: Wet/Dry
PHASER Wet/Dry sets the balance between the phaser
output and the dry sound. OUTPUT Wet/Dry sets the
balance between the final phaser and tremolo output level
and the dry sound.
060: St. Ring Modulator
(Stereo Ring Modulator)
This effect creates a metallic sound by applying the
oscillators to the input signal. Use the LFO or Dynamic
Modulation to modulate the oscillator to create a radical
modulation. Matching the oscillator frequency with a note
number will produce a ring modulation effect in specific key
ranges.
a
Type
Phaser -
Tremolo,
...
Phaser LR -
Tremolo LR
Selects the type of the tremolo
and phaser LFOs p.283
Phaser - Tremolo,
Phaser - Tremolo Spin,
Phaser - Tremolo LR,
Phaser LR - Tremolo,
Phaser LR - Tremolo Spin, Phaser
LR - Tremolo LR
LFO Phase
[degree]
–180...+180
Sets the phase difference
between the tremolo and phaser
LFOs p.283
b
LFO
Frequency
[Hz]
0.02...20.00 Sets the speed of the LFO p.259
Src Off...Tempo
Selects a modulation source for
LFO speed
Amt
–20.00...
+20.00
Sets the LFO speed modulation
amount
c
MIDI Sync Off, On
When this is on, the LFO speed is
set by BPM, Base Note, and
Times, instead of Frequency
p.257
BPM
MIDI,
40.00...
300.00
MIDI syncs to the system tempo;
40–300 sets the tempo manually
for this individual effect p.257
Base Note ...
Selects the type of notes that
specify the LFO speed p.257
Times x1...x32
Sets the number of notes that
specify the LFO speed p.257
d
LFO Type
Individual,
Common1,
Common2
Selects either (individual) LFO,
Common FX LFO1, or Common
LFO2 p.257
Common
LFO Offset
[deg]
–180...+180
Sets the phase offset when Type
= Common 1 or Common 2
p.257
e
Phaser
Manual
0...100 Sets the phaser frequency range
Resonance –100...+100
Sets the phaser resonance
amount
f
Phaser Depth 0...100
Sets the phaser modulation
depth
Src Off...Tempo
Selects the modulation source
for the phaser modulation depth
Amt –100...+100
Sets the modulation amount for
the phaser modulation depth
g
Phaser Wet/
Dry
–Wet, –2 :
98...Dry... 2 :
98, Wet
Sets the balance between the
phaser effect and dry sounds
p.283
h
Tremolo
Shape
–100...+100
Sets the degree of the tremolo
LFO shaping
i
Tremolo
Depth
0...100
Se
ts
the tremolo modulation
depth
Src Off...Tempo
Selects the modulation source
for the tremolo modulation
depth
Amt –100...+100
Sets the modulation amount of
the tremolo modulation depth
Phaser
Phaser
Left
Right
Resonance
LFO Type
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Phaser Wet / Dry
Phaser Wet / Dry
LFO
LFO Phase
LFO Shape
Tremolo
Tremolo
j
Wet/Dry
Dry, 1 : 99...
99 : 1, Wet
Sets the balance between the
effect and the dry input
p.283
Src Off...Tempo
Selects a modulation source for
Wet/Dry
Amt –100...+100
Sets the modulation amount for
Wet/Dry
a
OSC Mode
Fixed, Note
(Key Follow)
Switching between specifying
the oscillator frequency and
using a note number
p.284
Pre LPF 0...100
Sets the damping amount of the
high range input to the ring
modulator p.284
b
Fixed
Frequency
[Hz]
0...12.00k
Sets the oscillator frequency
when OSC Mode is set to Fixed
p.284
Src Off...Tempo
Selects the modulation source
for the oscillator frequency when
OSC Mode is set to Fixed
Amt
–12.00k...
+12.00k
Sets the modulation amount of
the oscillator frequency when
OSC Mode is set to Fixed
c
Note Offset –48...+48
Sets the pitch difference from the
original note when OSC Mode is
set to Note (Key Follow)
p.284
Note Fine 100...+100
Fine-adjusts the oscillator
frequency p.284
d Direct Mix 0...100
Direct signal (after passing
through the pre-low-pass filter)
mixed into the ring modulation
output
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Pre LPF
Ring Modulator
Pre LPF
Ring Modulator
Note No.
OSC Mode
Fixed
Note (Key Follow)
Fixed Frequency
Pitch
Note Oset, Fine
Sine Oscillator
LFO
Direct Mix

Table of Contents

Other manuals for Korg Krome

Related product manuals