Sequencer mode
134
5–3: <2> T01–08,
5–4: <2> T09–16
5–3(4)a: Track Select, Tempo, RPPR
5–3(4)b: Track Info
For more information, please see “2–1: Trim T01–08, 2–2:
Trim T09–16” on page 123.
5–3(4)c: MIDI Filter 2
Track 01 (Track Number):
Enable JS X as AMS [Off, On]
Specifies whether or not MIDI pitch bend messages (the X
axis of the joystick) will be received to control the AMS
effect assigned to JS X. (This is not a filter for MIDI pitch
bend message reception.) For more information, please see
“Alternate Modulation Sources (AMS)” on page 339.
Enable JS+Y [Off, On]
Specifies whether or not MIDI CC#1 (the +Y axis of the
joystick, or a Realtime Controls knob assign setting) will be
received.
Enable JS–Y [Off, On]
Specifies whether or not MIDI CC#2 (the –Y axis of the
joystick, or a Realtime Controls knob assign setting) will be
received.
Enable Ribbon CC#16 [Off, On]
Specifies whether or not MIDI CC#16 (specified as the
assignment of a Realtime Controls knob) will be transmitted
or received.
Track 02...08, 09...16 (Track Number):
These are the MIDI Filter 2 settings for MIDI tracks 2–8 and
9–16. They are the same as for track 1. For more information,
please see “Track 01 (Track Number):” above.
V
5–3(4): Menu Command
•0: Memory Status see p. 163
•1: Exclusive Solo see p. 64
•2: Rename Song see p. 163
•3: Delete Song see p. 163
•4: Copy From Song see p. 163
•5: Load Template Song see p. 163
•6: Save Template Song (Save as User Template Song)
see p. 164
•7: FF/REW Speed see p. 164
•8: Set Location (Set Location for Locate Key) see p. 164
•9: GM Initialize see p. 165
•10:
Copy from Combination
see p. 166
• 11: Copy from Program see p. 167
For more information, please see “Sequencer: Menu
Command” on page 163.
5–5: <3> T01–08,
5–6: <3> T09–16
Here, you can specify whether the effect of knobs 1–4 when
the SELECT button has selected Realtime Controls TONE
will be transmitted and received. The MIDI control
messages assigned to knobs 1–4 when Realtime Controls
TONE is selected are fixed.
5–5(6)a: Track Select, Tempo, RPPR
5–5(6)b: Track Info
For more information, please see “2–1: Trim T01–08, 2–2:
Trim T09–16” on page 123.
5–5(6)c: MIDI Filter 3
Track 01 (Track Number):
Enable Realtime Controls–CUTOFF [Off, On]
Enables or disables reception of MIDI CC#74 (the KROME’s
filter cutoff frequency), which is assigned to knob 1 when
Realtime Controls TONE is selected.
Enable Realtime Controls–RESONANCE [Off, On]
Enables or disables reception of MIDI CC#71 (the KROME’s
filter resonance level), which is assigned to knob 2 when
Realtime Controls TONE is selected.
Enable Realtime Controls–EG INTENSITY [Off, On]
Enables or disables reception of MIDI CC#79 (the KROME’s
filter EG intensity), which is assigned to knob 3 when
Realtime Controls TONE is selected.
To Next Page
Loading...
