Sequencer mode
136
5–9(10)c: MIDI Filter
Track 01 (Track Number):
Enable SW1 [Off, On]
Enable SW2 [Off, On]
These settings specify whether SW1 Mod (CC#80) and SW2
Mod (CC#81) will be transmitted and received if they are
assigned to the SW1 and SW2 buttons.
Note: If Portamento SW (CC#65) is assigned to SW1 or SW2,
the Enable Portamento SW setting on the MIDI <1> page will
take priority.
Note: The functions of SW1 and SW2 are assigned on the P1:
Controllers Setup page (see p.122).
Enable Foot Switch [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
SWITCH will be received. The function is assigned in Global
P2: Controllers– Foot Controllers page.
This filter setting is valid when a MIDI control change is
assigned.
Enable Foot Pedal [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
PEDAL will be received. The function is assigned in Global
P2: Controllers– Foot Controllers page.
This filter setting is valid when a MIDI control change is
assigned.
Track 02...08, 09...16 (Track Number):
These are the MIDI Filter 5 settings for MIDI tracks 2–8 and
9–16. They are the same as for track 1. For more information,
please see “Track 01 (Track Number):” above.
V
5–9(10): Menu Command
•0: Memory Status see p. 163
•1: Exclusive Solo see p. 64
•2: Rename Song see p. 163
•3: Delete Song see p. 163
•4: Copy From Song see p. 163
•5: Load Template Song see p. 163
•6: Save Template Song (Save as User Template Song)
see p. 164
•7: FF/REW Speed see p. 164
•8: Set Location (Set Location for Locate Key) see p. 164
•9: GM Initialize see p. 165
•10:
Copy from Combination
see p. 166
• 11: Copy from Program see p. 167
For more information, please see “Sequencer: Menu
Command” on page 163.
5–11: <6> T01–08,
5–12: <6> T09–16
5–11(12)a: Track Select, Tempo, RPPR
5–11(12)b: Track Info
For more information, please see “2–1: Trim T01–08, 2–2:
Trim T09–16” on page 123.
5–11(12)c: MIDI Filter3
Track 01 (Track Number):
Enable Other Control Change Messages [Off, On]
Specifies whether or not MIDI control messages not covered
in the preceding MIDI Filter items will be received.
Enable Waveform SysEx [Off, On]
This enables or disables reception of MIDI system exclusive
messages that freely switch the multisample used by an
oscillator while the program is sounding.
Track 02...08, 09...16 (Track Number):
These are the MIDI Filter 6 settings for MIDI tracks 2–8 and
9–16. They are the same as for track 1. For more information,
please see “Track 01 (Track Number):” above.
V
5–11(12): Menu Command
•0: Memory Status see p. 163
•1: Exclusive Solo see p. 64
•2: Rename Song see p. 163
•3: Delete Song see p. 163
•4: Copy From Song see p. 163
•5: Load Template Song see p. 163
•6: Save Template Song (Save as User Template Song)
see p. 164
•7: FF/REW Speed see p. 164
•8: Set Location (Set Location for Locate Key) see p. 164
•9: GM Initialize see p. 165
•10:
Copy from Combination
see p. 166
• 11: Copy from Program see p. 167
For more information, please see “Sequencer: Menu
Command” on page 163.
5-11c
5-11b
5-11a
5-11
Menu
To Next Page
Loading...
