Mono-Mono Serial (Mono-Mono) 111: Exciter - Comp (Exciter - Compressor)
309
111: Exciter - Comp (Exciter -
Compressor)
This effect combines a mono exciter and a compressor. You
can change the order of the effects.
112: Exciter - Limiter
This effect combines a mono exciter and a limiter. You can
change the order of the effects.
EXCITER
a
[X]Exciter
Blend
–100...+100
Sets the intensity (depth) of the
Exciter effect p.256
b
[X]Emphasis
Frequency
0...70
Sets the frequency range to be
emphasized p.256
c [X]EQ Trim 0...100 Sets the EQ input level
d
[X]Pre LEQ
Gain [dB]
–15...+15 Sets the gain of Low EQ
Pre HEQ Gain
[dB]
–15...+15 Sets the gain of High EQ
COMPRESSOR
e
[C]
Sensitivity
1...100 Sets the sensitivity p.251
f
[C]Attack 1...100 Sets the attack level p.251
Output Level 0...100
Sets the compressor output level
p.251
g Routing
Exciter
Comp,
Comp
Exciter
Switches the order of the exciter
and compressor
h
Wet/Dry
Dry, 1 : 99...
99 : 1, Wet
Sets the balance between the
effect and the dry input
Src Off...Tempo
Selects a modulation source for
Wet/Dry
Amt –100...+100
Sets the modulation amount for
Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
+
Routing
Compressor
LEQ HEQ
EQ Trim
Comp
Output Level
Envelope - Control
Exciter
Exciter
EXCITER
a
[X]Exciter
Blend
–100...+100
Sets the intensity (depth) of the
Exciter effect p.256
b
[X]Emphasis
Frequency
0...70
Sets the frequency range to be
emphasized p.256
c [X]Trim 0...100 Sets the EQ input level
d
[X]Pre LEQ
Gain [dB]
–15...+15 Sets the gain of Low EQ
Pre HEQ Gain
[dB]
–15...+15 Sets the gain of High EQ
LIMITER
e [L]Ratio
1.0 : 1...
50.0 : 1, Inf : 1
Sets the signal compression ratio
p.307
f
[L]Threshold
[dB]
–40...0
Sets the level above which the
compressor is applied p.307
g [L]Attack 1...100 Sets the attack time
Release 1...100 Sets the release time
h
[L]Gain
Adjust [dB]
–Inf,
–38...+24
Sets the limiter output gain
p.307
i Routing
Exciter
Limiter,
Limiter
Exciter
Switches the order of the exciter
and limiter
j
Wet/Dry
Dry, 1 : 99...
99 : 1, Wet
Sets the balance between the
effect and the dry input
Src Off...Tempo
Selects a modulation source for
Wet/Dry
Amt –100...+100
Sets the modulation amount for
Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
+
Routing
LEQ HEQ
EQ Trim
Exciter
Exciter
Limiter
Limiter
Gain Adjust
Envelope - Control