Korg Krome - Page 182

Sequencer mode
174
Erasing multiple notes
Limited to the Erase operation, you can select multiple
events and erase them in a single operation.
1. Press the tool.
2. Drag to enclose the region of notes that you want to
erase. The notes to be erased will be highlighted.
When you release, the data will be erased.
Editing control data
Editing a data value
1. Press the tool.
2. Choose the data that will be shown in the control view
area. If you’ve selected note events, this area will show
velocity data.
3. Press the square at the top of the data that you want to
edit.
The indication will be highlighted. Continue pressing, and
event information will be displayed in the upper left.
4. Drag up/down to change the value.
Alternatively, you can enter the desired value in the event
list.
Creating continuously changing data values
1. Press the tool.
2. Choose the data that will be shown in the control view
area.
3. Drag over the region whose values you want to change.
The path on which you drag is shown by a line. When
you release, the values will change to fit that line.
12
1
2
3
4
12 3