Media: Menu Command Save All (PCG & SEQ)
231
destination. However if the file format is inappropriate,
the operation will be invalid and an error message will
be displayed.
The program bank and program numbers loaded into
the song will follow the Bank Map (Global 0–2a)
setting. If Bank Map is KORG, bank A will be selected
for bank select 00.00 (MSB. LSB). If Bank Map is GM(2),
bank G will be selected.
23) Load and Transmit MIDI Exclusive Data
All data in the .EXL file will be loaded, and transmitted from
MIDI OUT or the USB connector.
If the .EXL file contains two or more Exclusive data items,
use Transmit Interval Time to specify the time interval that
will be inserted between each item of Exclusive data.
If you are transmitting the data to another KROME, the
required time interval will depend on the type of data. After
transmitting all program data, you must allow an interval of
approximately 1 second. For details please see the Global
mode section on Dump Program–Dump Drum Track
Pattern (see p.218). For other MIDI devices, please see their
owner’s manual.
0–2: Save Menu Command
Cautions regarding Save
When saving combinations with Save All (PCG &
SEQ), Save PCG, or Save SEQ, you should also try to
save the programs used by each timbre or track (and
the drum kits used by the program), user arpeggio
patterns, and drum track user patterns at the same
time.
Similarly, when saving programs, you should also save
the drum kits, user arpeggio patterns, and drum track
user patterns used by the program at the same time.
If the data being saved does not fit on one volume
of media
When saving a .PCG, or .SNG file, and the data does not fit
on one volume of media, the display will read “No space
available on media”.
Either delete unneeded files to create free space on the
media before saving, or save the data to other media.
Save All (PCG & SEQ)
Save All (PCG & SEQ) is available on the Save tab.
This command saves all programs, combinations, drum kits,
global settings, user arpeggio pattern, and drum track user
patterns from internal memory to media as a .PCG file.
Songs and cue lists are saved to media as a .SNG file.
This command is valid only when the current directory is a
DOS directory.
1. Use the text edit button to move to the text input dialog
box, and specify the filename. (See OG page 117)
For example, if you specify NEWFILE and execute the save
command, files named NEWFILE.PCG, and NEWFILE.SNG
will be saved to the media.
2. Select the bank(s) that you want to save.
Programs, combinations, drum kits, and user arpeggio
patterns can be saved in units of banks. Information on the
bank to be saved is displayed below each Selection button.
Banks that are checked will be saved.
If you want to modify the selections, press the Selection
button to open the dialog box, and check the check boxes for
the data you want to save.
To Next Page
Loading...
