Media: Menu Command Rename
233
2. Transmit the Exclusive data that you wish to save to the
KROME.
While the data is being received, the display will indicate
“Status=RECEIVING MIDI DATA.”
When reception ends, the size of the received data and the
size of the remaining free area will be rewritten. The display
will change to “Status=AWAITING MIDI DATA,” and you
can continue transmitting Exclusive data to the KROME.
During reception, the Cancel button and the OK button
cannot be pressed.
3. Use the text edit button to move to the text input dialog
box, and specify the filename. (See OG page 117)
0–3: Utility Menu Command
Rename
Rename is available on the Utility tab.
This command renames the selected file or directory.
This command is valid only when a DOS file or a DOS
directory is selected.
1. Select the file or directory whose name you want to
edit.
2. Select “Rename” to open the dialog box.
3. Press the text edit button to access the text input dialog
box, and modify the name (See OG page 117).
Copy
Copy is available on the Utility tab.
This command copies the selected file or directory.
This command is valid only when a DOS file or a DOS
directory is selected.
1. Select the file or directory that you want to copy.
2. Select “Copy” to open the dialog box.
3. Copy will show the name of the selected file or direc-
tory.
If you wish to change the file or directory that will be
copied, use the text edit button to move to the text input
dialog box, and specify the filename that you wish to copy.
(See OG page 117)
Using [*/? ]as a Wildcard: When you use the text edit button
to access the text input dialog box and specify the name of
the file or directory to be copied, you can use “*” and “?”
characters as wildcards. For example, if in the above
example you specify PRELOAD1.* (instead of
PRELOAD1.PCG), all filenames of PRELOAD1. with any
filename extension will be copied at the same time: i.e.,
PRELOAD1.PCG, PRELOAD1.SNG, ...
Example)
PRELOAD1.* : PRELOAD1.PCG, PRELOAD1.SNG, ...
PRELOAD?.PCG : PRELOAD1.PCG, PRELOAD2.PCG,
PRELOAD3.PCG, ...
When wildcards are used, only files will be subject to
copying. Directories will not be copied.
4. Use the Open button and Up button to select the copy
destination directory.
To Next Page
Loading...
