EasyManua.ls Logo

Krone Comprima V 180 - Page 213

Krone Comprima V 180
242 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Malfunction, cause and remedy 17
Faults of the electrics/electronics 17.5
Comprima V 180
Original Operating Instructions 150001053_00_en 213
521109-
Low
The voltage group (UB2) has not passed the self-test.
Possible cause Remedy
FMI 4: An undervoltage or a short circuit to ground has occurred.
There is a cable break or
short circuit.
Note down the error number on the FMI and contact the
KRONE service partner.
521110-
Low
The voltage group (UB3) has not passed the self-test.
Possible cause Remedy
FMI 4: An undervoltage or a short circuit to ground has occurred.
There is a cable break or
short circuit.
Note down the error number on the FMI and contact the
KRONE service partner.
521111-
Low
The voltage group (UB4) has not passed the self-test.
Possible cause Remedy
FMI 4: An undervoltage or a short circuit to ground has occurred.
There is a cable break or
short circuit.
Note down the error number on the FMI and contact the
KRONE service partner.
521112-
Low
The voltage group (UB5) has not passed the self-test.
Possible cause Remedy
FMI 4: An undervoltage or a short circuit to ground has occurred.
There is a cable break or
short circuit.
Note down the error number on the FMI and contact the
KRONE service partner.
521113-
Low
The voltage group (UB6) has not passed the self-test.
Possible cause Remedy
FMI 4: An undervoltage or a short circuit to ground has occurred.
There is a cable break or
short circuit.
Note down the error number on the FMI and contact the
KRONE service partner.
521114-
Low
Supply voltage of the sensors Uext1 faulty.
Possible cause Remedy
FMI 4: An undervoltage or a short circuit to ground has occurred.
There is a cable break or
short circuit.
Note down the error number on the FMI and contact the
KRONE service partner.
521115-
Low
Supply voltage of the sensors Uext2 faulty.
Possible cause Remedy
FMI 4: An undervoltage or a short circuit to ground has occurred.
There is a cable break or
short circuit.
Note down the error number on the FMI and contact the
KRONE service partner.

Table of Contents

Related product manuals