Krone Comprima V 180 - Page 51

Initial operation 6
Mounting the bale ejector 6.7
Comprima V 180
Original Operating Instructions 150001053_00_en 51
1
6
7
8
2
4
5
3
RP000-496
To mount the strip (1) on the right and left side of the bale ejector:
 Fit a screw (6), disc (7) and locknut (8).
 Make sure that the screw (6) is not secured too tightly. The screw (6) must be flush with the
locknut (8).
 Fit a screw (2), springs (3), disc (4) and locknut (5).
 Place the bale ejector on the machine.