8-51
System Menu > [System/Network]
[Wireless Network]
Configure settings for the optional Wireless Network Interface Kit.
*1 Not displayed if [Ad Hoc] is selected for [Connection Mode].
*2 Not displayed if [WPA2-PSK] was selected for [Network Authentication].
This function is displayed when the optional Wireless Network Interface Kit (IB-51) is installed.
Item Description
Connection Status When the optional is installed, you can check the wireless LAN status.
Quick Setup Wizard If the machine will connect to an access point that supports the automatic wireless
network setup, connection settings can be configured by Quick Setup.
Available Network Displays access points to which the machine can connect. Select a desired access point
from the list.
Push Button If the access point supports the push button method, wireless settings can be
configured using the push button. This setting executes push button, and the connection
is started by pressing the push button on the access point.
The push button method supports only the WPS.
PIN Code Method
(Device)
Starts connection using the machine's PIN code. Enter the PIN code into the access
point. The PIN code of the machine is automatically generated.
PIN Code Method
(Terminal)
Starts connection using the PIN code of the access point. Enter the PIN code of the
access point.
Custom Setup The detailed settings for wireless LAN can be changed.
Network Name (SSID) Set the SSID (Service Set Identifier) of the wireless LAN to which the machine connects.
An SSID can contain up to 32 characters.
Connection Mode Set the connection mode.
Value: Ad Hoc, Infrastructure
• Ad Hoc: Directly communicates with the device without going through an
access point. This method cannot be used to connect to two or more devices.
• Infrastructure: Performs communication through an access point.
Channel Set channel. Use [-] / [+] or the numeric keys to enter a number.
Value: 1 to 11
Network Authentication Select network authentication type. To select other options, open the device home page
from a computer.
Value: Open System, Shared Key, WPA-PSK
*1
, WPA2-PSK
*1
Encrypt Select encryption method. If the option other than [Disable] is selected, enter the WEP
key or the Preshared key. The setting values vary depending on the Network
Authentication setting. Select [Data Encryption].
When Network Authentication is set to [Open] or [Shared]
Value: Disable, WEP
When Network Authentication is set to [WPA-PSK] or [WPA2-PSK]
Value: TKIP
*2
, AES, Auto
*2
, Pre-shared Key
• If [WEP] is selected, enter the WEP key. A WEP key can contain up to 26
characters.
• If [TKIP], [AES] or [Auto] is selected, enter the Preshared key. Enter the value
in 8 to 64 characters.
To Next Page
Loading...
Need help?
General
