6-40 824 Reference Manual 11/8/00
The following explains the display’s components:
Display label
- This shows the current display (for example,
“
SLM Stats-c
”).
Overload message
- The “Stats-c”
display indicates the
occurrence of instrument overloads during the measurement.
If one or more overloads have occurred, the display shows
the total number of overloads. If no overloads have
occurred, the display shows a “No Overloads have
occurred” message instead.
Run Log (LOG & SSA)
The Run Log displays the start and stop times/dates of the
active measurement in the System 824’s memory. You use
the
u
and
d
arrow keys to scroll through the log records.
The “Run Log” display can be accessed by simply selecting
Run Log
with the
c
Check key from within the main View
menu.
The
Run Log
display consists of four major components:
• Display label
• Log number
• Event Date / Time
• Run / Stop indicator
Display label
Overload message
To Next Page
Loading...
Need help?
General
