7-36 824 Reference Manual 11/8/00
SPL Histogram - (LOG) SPL Histogram
either enables or disables the printing of the
SPL histogram report. The histogram report contains a histo-
gram of the SPL levels that have occurred during the overall
and current measurements. The report also prints a table of
all (1 to 99%) L
N
percentiles. This setting provides the fol-
lowing two options:
No -
The SPL histogram report will not print.
Yes -
The SPL histogram report will print.
Pk-1 Histogram - (LOG)
The
Pk-1 Histogram
setting either enables or disables the
printing of the Peak I histogram report. The histogram report
contains a histogram of the Peak I levels that have occurred
during the overall measurement. This setting provides the
following two options:
No -
The peak I histogram report will not print.
Yes -
The peak I histogram report will print.
Pk-2 Histogram - (LOG)
The
Pk-2 Histogram
either enables or disables the printing
of the Peak 2 histogram report. The histogram report con-
tains a histogram of the Peak 2 levels that have occurred dur-
ing the overall measurement. This setting provides the
following two options:
No -
The peak 2 histogram report will not print.
Yes -
The peak 2 histogram report will print.
Intv Report - (LOG, SSA)
The
Intv Report
either disables the printing of the interval
report or enables either the “long” or the “short” version of
this report. The “short” interval report contains all the basic
measurement parameters for each interval period in a speci-
fied range of records. The “long” interval report contains
everything the short report contains plus some additional
information.
This setting provides the following three options:
No -
The interval report will not print.
Short -
The “short” interval report (including L
max
,
L
min
, SEL, L
eq
, Pk-I, Pk-II, overloads, and exceed-
ances) will print.
To Next Page
Loading...
Need help?
General
