9/12/00 B-61
Error Messages and Warnings
The code listed is the number provided by R98.
All error messages begin with: CHR$(7), “ERROR - ”
All warning messages begin with: CHR$(7), “WARNING - ”
X 100 ALL XMODEM Begin Printing (same as P100 except through the XMODEM
communication protocol) Use with UnFormatted Reports to download a
file to be viewed in a spreadsheet program. Also use this to download
reports for printing on a computer’s printer, rather than directly from the
824; this lets reports to be printed on a nice laser printer connected to a
computer without having to disconnect it from the computer.
^X^X ISM, SSA,
LOG, RTA
CANcel transfer mode, 2 in a row (ASCII <CAN> or CHR$(24))
Error
Code
Message
1 “COUNT OVERFLOW”
2 “EXPONENTIAL OVERFLOW”
3 “RTX TASK SELECT”
4 “BAD EXCHANGE RATE”
5 “UNKNOWN IRQ”
6 “WATCHDOG RESET”
7“RAM BANK”
8 “OPCODE ERROR”
To Next Page
Loading...
