11/8/00 Using ID Setting Files 7-53
displays. In some cases the check menu allows you to toggle
between a views tabular mode or graphical spectrum mode.
This section will present the following:
• Check Menu Example
• SLM Check Menu Options
• Other SSA Check Menus
• Other Logging (LOG) Check Menus
Check Menu Example
The Check menu is accessed by simply pressing the
Check key from within an Instrument ID’s view. The follow-
ing is an example of using the Check menu from a SLM
view to change the
Detector
setting from the selected instru-
ment’s SLM display:
Use the
and
keys to move
from one setting to the next. Then use
the
key to change the selected
setting. The
key is used to
return to previous menus
Step 1
From the Instrument’s SLM (LOG or SSA) view
display, press the
key to access the
Check
menu. A menu similar to the following appears:
To Next Page
Loading...
