10-18 824 Reference Manual 11/8/00
• Detector: Linear
• Linear Detector Time: 00.1000 seconds
• Autostore: Yes
• ByTime: No
•Triggering: ON
• Trigger Mode: Now
• End Mode: Time
• End Time: 10.0000 seconds
• End Then: Stop
Display Views
This next section will explain the various displays available
under the
V
View key. Once a measurement has been
taken, the 824 allows you to view the results and manipulate
the data.
RTA Views
The RTA Display Views are accessed through the
V
View key. To select the RTA Display Views press the
V
View key. The following menu will appear:
Now press the
r
right arrow key to bring up the “View
RTA” display view menu.
To Next Page
Loading...
