11/8/00 Front Panel Keys; their Functions and Menus 3-27
Memory
To access the
Memory
display, use the
u
or
d
key to
select
Memory
from the
Tools
menu, then press the
c
key.
The following appears:
The
Memory-a
display shows the amount of memory avail-
able for storing data. This information is given both in bytes
and as a percentage of the total memory that can be used for
storing data. (This “total memory” does not include the
memory allocated for ID registers.)
Only those records enabled for the
active instrument type are displayed.
In addition, the
Memory-a
display shows the number of pre-
viously-stored records (of various types) for the active ID.
Pressing the
r
key again moves to the
Memory-b
screen.
The following appears:
The top portion of the
Memory-b
display shows the same
“available memory” information as in the
Memory-a
dis-
Available memory (in bytes)
Available memory (as a percentage of total data
memory)
Number of various types of history records for a
given ID (SSA in this example)
Available memory (in bytes)
Available memory (as a percentage of
total data memory)
Number of setup registers allocated for storing
instrument definitions (IDs)
Total memory, including both data and setup register
memory
Total data files in memory
To Next Page
Loading...
