Larson Davis System 824 - Chapter 4 Quick Start; Turning On and Calibrating the System 824

To Next Page

To Previous Page

11/8/00 Quick Start 4-1

CHAPTER

Quick Start

The System 824 instrument provides simultaneous measure-

ments of sound pressure level using Fast, Slow, Impulse,

Peak and Leq detectors with A, C, and Flat weighting cover-

ing a large dynamic range of greater than 105 dB in the LOG

and ISM instrument and 80 dB in SSA instrument.

With the System 824 calibrated, the desired instrument defi-

nition selected, and its associated settings properly config-

ured, you can easily take a measurement and examine the

readings from the data collected. Taking an actual measure-

ment with the System 824 is as easy as pressing the

(RUN/STOP) key.

This chapter helps users begin using the System 824 imme-

diately. This chapter will present the following:

• Turning on and Calibrating the System 824

• Taking Measurements and Storing Data

• Recalling Stored Data

• Deleting Stored Data

• Selecting and Modifying Instrument Definitions (IDs)

Turning On and Calibrating the System 824

This section guides you through the process of turning on

and calibrating the System 824.

Other manuals for Larson Davis System 824