Larson Davis System 824 - Entering Settings

B-26 824 Reference Manual 9/12/00
Responses are denoted by (x) if Yes/No or (n) if numerical.
Ln Query Commands (SSA)
Entering Settings
Option Settings
Settings are entered with the Set command. The syntax for
the Set command is S[ET ]setting_number, setting_value or
S[ET ]setting_number;option_text where setting_number is
the setting number, setting_value is the desired setting, and
option_text is the textual setting for the option settings
(those that have one setting from a list of possible settings).
4.Q74, 32 0
5.Q74, 3 Excd History Enable=[_No]
Commands Instru-
ment
Type
Description Comments
Q 63 SSA Ln 1 Percent nn.nn
Q 64 SSA Ln 2 Percent nn.nn
Q 65 SSA Ln 3 Percent nn.nn
Q 66 SSA Ln 4 Percent nn.nn
Q 67 SSA Ln 5 Percent nn.nn
Q 68 SSA Ln 6 Percent nn.nn
Q 139 SSA Enable Lns [No/Yes]
Q 224 SSA Start Level nn