4-8 824 Reference Manual 11/8/00
The RTA Max view shows a graphi-
cal display of the Live spectrum of
the maximum broadband level since
the last current reset.
Step 8
Use the
r
and
l
arrow keys to change the fre-
quency level being displayed.
Step 9
Press the
d
arrow key to change to the
RTA Min
view. A screen similar to the following appears
Step 10
Use the
u
and
d
arrow keys if you want to
move back and forth between the different RTA
screens.
Step 11
Press the RUN/STOP
s
key to stop the current
reading.
If you attempt to store data while a
measurement is still running, a
warning will be displayed, indicat-
ing that the measurement must first
be stopped.
Step 12
Press the
D
Data key. Select
Store Data
and
press the
c
key to store the measurement’s data.
Recalling Stored Data
Measurement data that has been stored can be recalled for
review at any time. To recall a data file, do the following:
Step 1
Press the
D
Data key and a screen similar to the
following appears:
This is the minimum level obtained
for each frequency since the last cur-
rent reset.
To Next Page
Loading...
Need help?
General
