B-70 824 Reference Manual 9/12/00
Operation Notes
When using the Logic Input line in the ‘LEVEL’ mode both
I/O and keyboard Runs and Stops are inhibited. If the line is
High the 824 takes data and if the line is Low no data is
taken. The ‘Pause’ mode will pause the data taking process
while the line is high; this may be triggered by high wind
speed. In the ‘Toggle’ mode when the Logic Input line goes
high the 824 toggles between RUN and STOP modes.
:
FUNCTION KEY #2 (DATA)
;
FUNCTION KEY #3 (SETUP)
<
FUNCTION KEY #4 (TOOLS)
=
FUNCTION KEY #5 (PRINT)
To Next Page
Loading...
Need help?
General
