6-48 824 Reference Manual 11/8/00
SPL Exceedances
- SPL Exceedances shows how many
times during this interval that the instrument’s SPL Exceed-
ance Level was surpassed.
Peak-I Exceedance
s - Peak-I Exceedances shows how
many times during this interval that the instrument’s Peak - I
Exceedance Level was surpassed.
Peak-II Exceedances
- Peak-II Exceedances shows how
many times during this interval that the instrument’s Peak-II
Exceedance Level was surpassed.
Overloads -
This shows how many overloads occurred dur-
ing this interval.
Intervals-e Display
The
Interval-e
display consists of three major components:
• Display label
• Interval Number
• Ln Centiles Readings
The
Interval-e
display is shown below (LOG instrument
only):
The following explains each of the display’s components:
Display label
- This shows the current display (for example,
“
Interval-e”).
Interval Number
- The “Interval Number”
display shows
each measurement interval in the order that it occurred. The
Display label
Interval Number
Ln Centiles
Readings
This display will show
if the interval setting “Intv Save
Ln’s” is set to “No”.
To Next Page
Loading...
Need help?
General
