7-4 824 Reference Manual 11/8/00
Step 5
Using the
or
keys, highlight the SLM
option and press the
c
Check key.
Step 6
Use the
or
keys to highlight the
Detec-
tor
setting, then press the
key or the
c
Check key. The
Detector Settings
menu appears:
Step 7
In the pop-up windows use the
or
keys
to highlight the
Fast
setting, then press the
c
Check key to accept the setting change. The
SLM&RTA (SSA)
instrument’s
Detector
setting is
now set to
Fast
. Press the
S
Setup key to close
the menu and return to the SLM+RTA view.
Settings Descriptions
Within the Edit Settings menu, use
the
and
keys to move
from one setting to the next. Use
the
key or
c
Check key to
select the setting to be modified. The
key is used to return to previ-
ous menus.
Descriptions of the System 824 instrument’s various settings
are provided in this section. The following will be covered:
• “Common SLM Settings”
• “Common Control Settings”
• “Logging SLM TWA Settings”
• “Logging SLM Triggering Settings”
• “LOG and SSA Ln Settings”
To Next Page
Loading...
