9/13/00 Printing a Report 8-3
Step 3
Use the
u
and
d
arrow keys to highlight Set-
tings, then press the
r
arrow key or
c
Check
key to select it. The following menu appears:
Depending on your printer configu-
ration you may have to modify the
Printer Settings for Printer Baud
Rate and Flow Control .
Use the table below to set up the printer settings by using the
u
and
d
arrow keys to highlight “Printer Type”,
“Printer Baud”, and “Flow Control” and then press the
c
Check key to select the correct option for each..
Recall Format Summary
Tailored
All, short
All, long
None enabled
SSA, LOG
Customize [allows you to select the print
options for an instrument ID and
customize your reports - see the sec-
tion on “Printing a Custom Report”]
SSA, LOG, RTA
Print [prints the report] SSA, ISM, LOG,
RTA
Menu Item Options
Printer Type ASCII, Epson, IBM, HPJet, HPLzr
Printer Baud 300, 1200, 2400, 9600, 19200,
28800, 57600, 115 K
Flow Control None, Hdwr, XOff, Both
To Next Page
Loading...
