9/13/00 Printing a Report 8-17
All, Long Report
This template shows the default settings for the All, Long
Report. The All, Long Report prints all of the reports. Those
reports with a long version are printed in the long form.
After selecting the template, you can modify it as explained
in “Printing a Custom Report”.
Histograms SPL Histogram [Yes] You can customize the SPL Histogram report by choosing the long or
short report.
Lowest Level (045) Selects the lowest SPL histogram level to be printed.
Highest Level (095) Selects the highest SPL histogram level to be printed.
Resolution (5.0) Selects the SPL histogram resolution
Pk-1 Histogram [Yes] You can customize the Peak1 Histogram report by choosing the long or
short report.
Lowest Level (110) Selects the lowest Peak1 histogram level to be printed.
Highest Level (160) Selects the highest Peak1 histogram level to be printed.
Resolution (5.0) Selects the Peak1 histogram resolution
Pk-2 Histogram [Yes] You can customize the Peak2 Histogram report by choosing the long or
short report.
Lowest Level (070) Selects the lowest Peak2 histogram level to be printed.
Highest Level (120) Selects the highest Peak2 histogram level to be printed.
Resolution (5.0) Selects the Peak2 histogram resolution
All, Short Report Template (LOG instrument)
All, Long Report Template (SSA instrument)
Report Settings
Lower Level
Report Settings Description
Unformated [No] A dump of all
Read
,
Query
and
Interval
remote commands.
Multiple values are comma delimited.
Data Report [Yes] This shows general information such as Leq, SEL, Dose, Projected Dose,
Lmin, Lmax, Peak, Ln’s, exceedance, and calibration logs.
Setup Report [Yes] Print the settings and their values for the SSA instrument.
To Next Page
Loading...
