8-20 824 Reference Manual 9/13/00
None Enabled Report
When “None Enable” is selected from the Recall Format
menu then all of the reports are disabled and will not be
printed. This allows you greater ease in printing only a
selected number of reports.
After selecting this template you can modify it as explained
in “Printing a Custom Report”.
None Enabled Report Template (SSA instrument)
Report Settings
Lower Level
Report Settings Description
Unformated [No] A dump of all
Read
,
Query
and
Interval
remote commands.
Multiple values are comma delimited.
Data Report [No] This shows general information such as Leq, SEL, Dose, Projected Dose,
Lmin, Lmax, Peak, Ln’s, exceedance, and calibration logs.
Setup Report [No] Print the settings and their values for the SSA instrument.
Intv Report [No] Leq, SEL, Lmin, Lmax, Peak, Uwpk, exceednaces, time, date, and dura-
tion in the short report. The Long reports adds the Ln values and Spectral
LNs for the Interval period.
Hist Report [No] Leq for each time history period.
Print Range Intv Report [No] You can customize the interval report by choosing the long or short
report.
Lowest Record (00000) Selects the lowest interval record to be printed.
Highest Record (65535) Selects the highest interval record to be printed.
Hist Report [No] You can customize the time history report by choosing the long or short
report.
Lowest Record (00000) Selects the lowest time history record to be printed.
Highest Record (>99999) Selects the highest time history record to be printed.
To Next Page
Loading...
Need help?
General
