11/8/00 Using the 824 Utility Software 9-5
Connect button. This button is used to estab-
lish a connection to the 824. Pressing this but-
ton will bring up the connect dialog box where
the connection parameters can be defined.
Retrieve Setups from 824. This button will
retrieve all current setups in the 824.
Create new setup button. This button will
allow the user to create a new setup that can
then be saved to disk, or saved in the 824.
Open a setup from a computer file. This button
will allowthe user to retrieve previously stored
setup files.
Store setup to disk. This button will allow the
user to store a setup to a disk.
Store setup in 824. This button will store the
setup in the 824. This function must be per-
formed before the setup can be used inside the
824.
Setup window button. This button will activate
the setup window portion of the 824 Utility
Program
To Next Page
Loading...
