9-8 824 Reference Manual 11/8/00
Setups will be retrieved from the 824 and will be displayed
in the
Setup
listbox.
In the list of setup files, the system setup is the first setup
and is followed by all of the permanent and user-defined set-
ups. In the setup list box, there are several parts of the Setup
title that can be used to identify the setup type.
Highlighting one of the setups in the list displays all of the
available settings in the setup dialog box (right side of the
The three letter Larson Davis assigned
name is listed in the blue Ovals. This
indicates the type of instrument ID for
which the setup was created.
‘P’ stands for a permanent ID. This would be
an original setup defined at Larson Davis
and cannot be modified.
No letter or an arrow indicates a modifiable User defined ID.
A lock icon in this place indicates a
user ID that has been locked so it can-
not be modified.
The name of the ID is listed in the right hand column.
For the permanent ID’s, this will be the Larson Davis
instrument type. For a user defined ID, this can be any-
thing that the user defines.
To Next Page
Loading...
Need help?
General
