9/12/00 B-13
NOTE: The exceedance Leq, R68, and
exceedance time, R69, include data from
qualified events that are stored in the
EXCD History. If an event is discarded
because it was shorter than the minimum
duration then it will not be included in
these values.
R68 LOG Total EXCD Leq nnn.n dB
R69 LOG Total EXCD Time hhhhh:mm:ss.s
R70 LOG Background Leq nnn.n dB
R86 ALL Battery Level nnn%
R87 ALL Battery Source (INT/EXT) ccc
R88 ALL Temperature -nnn.n
R89 ALL Serial Number ccccc
R90 ALL Firmware Rev. & Rev. Date n.nnn ddmmmyyyy
R91 ALL Free Memory nnnnnnn
R92 LOG Number of RUN/STOP Records nnnnn
R93 LOG Number of EXCD Records nnnnn
R94 ALL Number of INTV Records nnnnn
R95 LOG Number of HIST Records nnnnnnn
R96 LOG Number of Daily Records nnnnn
R97 LOG Number of Cal Records nnnnn
R98,n ALL Error Message List (n= 1 to 8) cccccccccccccccccccccc
n = 1 to the last error. If
n=0 or omitted then the 8
error codes are output as
number. (nnn, nnn, . . .
nnn).
R99 ALL Logic Output 1 State [On/Off}
To Next Page
Loading...
Need help?
General
