B-22 824 Reference Manual 9/12/00
Where “x” indicates a number to represent a combination of
weighting and detector which has these values:
If “x” is not provided or it is zero then the value indicated by
the Wght and Detc settings is given.
R 21,x SSA, ISM, LOG Current Maximum
Level
(Any Wght/
Dect)
nnn.n dB
R 22,x SSA, ISM, LOG Current Lmax Date
and Time
(Any Wght/
Dect)
ddmmmyy hh:mm:ss
R 23,w SSA, ISM, LOG OverAll Pk Level (Any Wght) nnn.n dB
R 24,w SSA, ISM, LOG OverAll Lpk Date
and Time
(Any Wght) ddmmmyy hh:mm:ss
R 25,w SSA, ISM, LOG Current Pk Level (Any Wght) nnn.n dB
R 26,w SSA, ISM, LOG Current Lpk Date
and Time
(Any Wght) ddmmmyy hh:mm:ss
R163,x SSA, ISM, LOG TAKT 3 (Any Wght/
Dect)
nnn.n dB
R164,x SSA, ISM, LOG TAKT5 (Any Wght/
Dect)
nnn.n dB
1 A weight, Slow detector
2 A weight, Fast detector
3 A weight, Impl detector
4 C weight, Slow detector
5 C weight, Fast detector
6 C weight, Impl detector
7 Flat weight, Slow detector
8 Flat weight, Fast detector
9 Flat weight, Impl detector
To Next Page
Loading...
