SDA Operator’s Manual
If you are saving to file, touch the Data Format field and select a format type from the pop-up
menu:
.
If you select ASCII or Excel, also touch the SubFormat field and select either Time Data or
Time & Ampl. Then touch the Delimiter field and select a delimiter character from the pop-up
menu: comma, space, semicolon, or tab.
1. Touch the Browse button for the Save file in directory field and browse to the location
where you want the file saved. The file name is assigned automatically and is shown below
the field.
2. Touch
.
Auto Save
You can also enable Auto Save from this dialog by touching one of the Auto Save buttons:
• Wrap (old files overwritten) Or
• Fill (no files overwritten).
CAUTION
If you select Fill, you can quickly use up all disk space on your hard disk.
SDA-OM-E Rev H 109
To Next Page
Loading...