LeCroy SDA - Page 166

Parameter Description Definition Notes
Local number Number of local features
(peak/trough pairs).
Hysteresis argument used to
discriminate levels from noise
in data.
Available with DDM2 option.
Standard in DDA-5005A.
Local pkpk Vertical difference between the
peak and trough of a local feature
(lmax lmin).
Hysteresis argument used to
discriminate levels from noise
in data.
Available with DDM2 option.
Standard in DDA-5005A.
Local tbe Time between events (between
local peak and next trough or local
trough and next peak).
Hysteresis argument used to
discriminate levels from noise
in data.
Available with DDM2 option.
Standard in DDA-5005A.
Local tbp Time between a local feature peak
and the next local peak.
Hysteresis argument used to
discriminate levels from noise
in data.
Available with DDM2 option.
Standard in DDA-5005A.
Local tbt Time between a local feature
trough and the next local trough.
Hysteresis argument used to
discriminate levels from noise
in data.
Available with DDM2 option.
Standard in DDA-5005A.
Local tmax Time of the maximum value of a
local feature.
Hysteresis argument used to
discriminate levels from noise
in data.
Available with DDM2 option.
Standard in DDA-5005A.
Local tmin Time of the minimum value of a
local feature.
Hysteresis argument used to
discriminate levels from noise
in data.
Available with DDM2 option.
Standard in DDA-5005A.
Local tot Time a local feature spends over a
user specified percentage of its
peak-to-trough amplitude.
Hysteresis argument used to
discriminate levels from noise
in data.
Available with DDM2 option.
Standard in DDA-5005A.
Local tpt Time between local feature peak
and trough.
Hysteresis argument used to
discriminate levels from noise
in data.
Available with DDM2 option.
Standard in DDA-5005A.
166 SDA-OM-E Rev H