Parameter Description Definition Notes
Width@level Width measured at a specific level.
Time between two
transitions of opposite
slope at a specified
level. (Slope specified
for 1st transition.)
Enhanced version
sets measurement
calculations to use
one of the following:
Base & Top (% or
absolute)
Peak-Peak (%)
0V-Max (%)
0V-Min (%)
Reference levels and edge-
transition polarity can be
selected. Hysteresis argument
used to discriminate levels
from noise in data.
Available with JTA2, USB2,
EMC, SDA, and XMAP
options.
Standard in SDA100G and
WavePro 7000A scopes.
Enhanced parameter available
with EMC option.
WidthN Width measured at the 50% level
and negative slope.
Standard parameter.
X@max Determines the horizontal axis
location of the maximum value
between the cursors.
Restricted to time and
frequency waveforms only.
X@min Determines the horizontal axis
location of the minimum value
between the cursors.
Restricted to time and
frequency waveforms only.
Zero Level Zero level of an eye diagram Available with SDA and SDM
options.
Standard in SDA, SDA100G,
and WaveExpert scopes.
176 SDA-OM-E Rev H
To Next Page
Loading...