The parameter location you choose will display "Web Edit" under the waveform display grid:
.
3. Touch the Web Editor tab to return to the web setup dialog. The math and parameter
locations you selected appear as outputs at the far right:
.
You may have to scroll up or down to see it.
4. Touch the Add Math button and select a math function from the Add Math Processor menu.
The math function icon will appear on the web setup field:
.
Touch and drag the icon to the desired location.
5. If you are using channel inputs, touch the arrow of a channel input icon:
.
Then drag a line from the channel to the input of the math function icon. If your math function
is a dual input function (such as ratio), select a second input and drag another line to the
second math input. If you are using a memory location:
304 SDA-OM-E Rev H
To Next Page
Loading...
Need help?
General