Lenze 8400 - ExportingImporting an Interconnection

16 Working with the FB Editor
16.9 Exporting/Importing an interconnection
1242
Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
16.9 Exporting/Importing an interconnection
The interconnection existing in the project can be exported to a file for reuse/transfer to other
devices.
 How to export the interconnection from the project to a file:
1. Go to the Project view in the context menu of the inverter and select the Export FB
interconnection... command.
2. Enter the memory location and the file name for the interconnection to be exported in the
Export FB interconnection dialog box.
3. Click Save to export the interconnection and close the dialog box.
 How to import the interconnection from a file to the project:
1. Go to the Project view in the context menu of the inverter and select the Import FB
interconnection... command.
2. Select the file with the interconnection to be imported in the Import FB interconnection
dialog box.
3. Click Open to import the interconnection and close the dialog box.
 Note!
The file can only be imported to devices of the same device type and version (e.g. 8400
HighLine C V1.0).