EasyManua.ls Logo

Lenze 8400 - 7 Technology Applications

Lenze 8400
1590 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 Technology applications
372 Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7 Technology applications
This chapter describes the handling and the functional range of the technology applications
available for the 8400 HighLine inverter.
Related topics:
Integrated technology applications
( 29)
Commissioning of the "Actuating drive speed" technology application
( 58)
Commissioning of the "Table positioning" technology application
( 66)
Commissioning of the "Switch-off positioning" technology application
( 81)
Technology application "Actuating drive speed"
This technology application preset in C00005
serves to solve speed-controlled drive
tasks, e.g. conveyor drives (interconnected), extruders, test benches, vibrators,
travelling drives, presses, machine tools, dosing systems.
TA "Actuating drive speed"
( 374)
Technology application "actuating drive speed (AC Drive profile)"
This technology application available from version 13.00.00 provides a speed and
torque control by means of "AC Drive Profile". The fieldbuses EtherNet/IP™ and
system bus (CANopen) are supported.
TA "actuating drive speed (AC Drive Profile)"
( 401)
Technology application "Table positioning"
This technology application serves to solve position-controlled drive tasks which are
normally controlled by a higher-level control via a fieldbus, e.g. transport facilities,
rotary tables, storage and retrieval units, feed drives, metering units, hoists.
Note: An external sequence control is required for this TA!
TA "Table positioning"
( 434)
"Switch-off positioning" technology application
This technology application available from version 04.00.00 is used to solve speed-
controlled drive tasks which require a pre-switch off or stopping at certain positions,
e.g. roller conveyors and conveying belts. The pre-switch off is implemented by
connecting switch-off sensors.
TA "Switch-off positioning"
( 464)
Note!
Please note that the "StateLine", "HighLine" and "TopLine" device types differ with regard
to the number, functional range, and flexibility of the technology applications offered.

Table of Contents

Other manuals for Lenze 8400

Related product manuals